Custom Wrought Iron Railings, Doors,
Balconies, Gates & Staircases in NYC
Explore 162 verified New York City works across 10 specialized galleries—from historic Brooklyn brownstone stoop railings and Manhattan brass balustrades to custom arched entry doors and spiral staircases forged by Damian Arce at 98 Thames St, Brooklyn.
Custom Wrought Iron Balcony Craftsmanship in NYC
Across Manhattan townhouses, Brooklyn brownstones, and Queens luxury residences, a custom wrought iron balcony blends structural security with timeless architectural prestige. Whether your building calls for romantic French Juliette scrolls, Beaux-Arts bronze medallions, or modern minimalist horizontal steel, master artisan Damian Arce engineers every balcony to exceed New York City Department of Buildings standards.
Engineered to NYC Building Code. Hand-Forged for Generations.
In New York City, exterior and interior iron railings, fire-safe gates, balconies, and staircases must satisfy strict NYC Department of Buildings (DOB) Building Code BC 1014 & BC 1015 regulations—including 36" to 42" guardrail heights, the 4-inch sphere baluster spacing rule, and 200-lb concentrated load resistance.
- Hot-Dip Galvanizing & Electrostatic Powder Coating: Maximum corrosion protection against NYC winter rock salt and coastal humidity.
- Architect, Designer & General Contractor Partner: Shop drawings, baluster sample carousels, and custom bronze/brass metallurgy in Brooklyn.
- Historic Brownstone & LPC Restoration: Authentic cast-iron newel posts, pineapple finials, and stoop railings for NYC landmarked properties.
Brownstone & Townhouse Ironwork Specialist
Preserving historical Manhattan & Brooklyn stoop architecture while exceeding modern New York City structural steel safety codes.
Architectural Ironwork Services in New York City
Every railing, door, staircase, balcony, canopy, and enclosure is custom-forged in our Bushwick, Brooklyn workshop (98 Thames St) and installed across all 5 NYC boroughs.
Interior & Exterior Iron Railings NYC
Historic brownstone stoop handrails, cast-iron newel posts, sweeping interior marble stair balustrades, and mezzanine guardrails across Manhattan & Brooklyn.
Wrought Iron Doors & Driveway Gates
High-security arched double entry doors with insulated glass, brownstone under-stoop pedestrian gates, and automated estate driveway gates in NYC.
Custom Brazing, Brass & Bronze
Artisan torch brazing, continuous curved solid brass cap rails, 24k gold-leaf acanthus scrollwork, and cast bronze medallions for Manhattan residences.
Spiral, Curved & Grand Staircases
Structural helical staircases, multi-flight space-saving spiral stairs, and palatial marble-tread iron staircases engineered for NYC lofts and townhouses.
Balconies, Canopies & Porticos
Hand-forged Juliette balconies, rooftop terrace guardrails, cantilevered glass doorway awnings, and sculpted wrought iron entrance canopies.
Enclosures, Tree Guards & Shop
Limestone pier property fences, retaining wall iron enclosures, NYC Parks-compliant sidewalk tree guards, and custom forging in our Brooklyn shop.
Damian Arce • Master Artisan
98 Thames St, Brooklyn
Meet Master Artisan Damian Arce
With over two decades of dedicated blacksmithing, torch brazing, and ornamental metal forging in New York City, Damian Arce combines classical European ironwork mastery with modern American structural engineering.
Operating directly from our fabrication studio at 98 Thames St, Brooklyn, NY 11237, Damian personally measures every site, produces full-scale chalk and CAD layouts on our forging tables, guarantees 100% NYC DOB & LPC compliance, and oversees every installation across Manhattan, Brooklyn, Queens, The Bronx, and Staten Island.
Serving All 5 Boroughs of New York City
From historic Landmark townhouses to modern luxury penthouses, our Brooklyn workshop delivers and installs custom ironwork throughout NYC.
Manhattan Ironwork
Custom brass & bronze stair balustrades, Beaux-Arts entry doors, Juliette balconies, and LPC brownstone stoop railings.
Upper East Side • Upper West Side • Tribeca • SoHo • West Village • Greenwich Village • Chelsea • Gramercy Park • Harlem • Fifth Ave
Brooklyn Ironwork
Fabricated locally at 98 Thames St, Brooklyn. Brownstone stoop restorations, arched double doors, driveway gates, and canopies.
Brooklyn Heights • Park Slope • Williamsburg • Bushwick • Dyker Heights • Bay Ridge • DUMBO • Cobble Hill • Bed-Stuy • Midwood
Queens Ironwork
Custom estate driveway gates, brick & limestone perimeter fence enclosures, exterior porch railings, and doorway canopies.
Astoria • Long Island City (LIC) • Forest Hills • Jamaica Estates • Bayside • Whitestone • Malba • Flushing
The Bronx & Staten Island
Heavy-duty sweeping arch estate gates, stone retaining wall wrought iron fences, spiral staircases, and security grilles.
Riverdale • Fieldston • Pelham Bay • Todt Hill • St. George • Tottenville • NYC Metro
Frequently Asked Questions — NYC Custom Ironwork
Expert answers on NYC Department of Buildings codes, brownstone restorations, galvanizing, and custom fabrication.
1. What are the NYC Department of Buildings (DOB) code requirements for iron railings and balconies? +
Under NYC Building Code BC 1014 and BC 1015, stair handrails must be installed between 34" and 38" above stair nosings, while exterior balconies, decks, and interior mezzanine guardrails require a minimum height of 36" to 42". Vertical balusters must be spaced so a 4-inch sphere cannot pass through at any point, and the assembly must resist a 200-lb concentrated load. Every project forged by Damian Arce is engineered for 100% NYC DOB compliance.
2. Do you restore historic brownstone stoop railings in Brooklyn and Manhattan Landmark (LPC) districts? +
Yes. We specialize in historic brownstone and limestone townhouse ironwork across Brooklyn Heights, Park Slope, Cobble Hill, Bed-Stuy, Harlem, Greenwich Village, and the Upper East Side—replicating authentic 19th-century cast-iron newel posts, pineapple and urn finials, fleur-de-lis spears, and under-stoop security gates.
3. How do you protect exterior iron doors, railings, and gates from rusting in NYC winters? +
All exterior steel and wrought iron fabricated at our Brooklyn shop undergoes hot-dip galvanizing, zinc-rich marine epoxy priming, and multi-stage electrostatic powder coating or automotive-grade urethane finishes—preventing corrosion from NYC sidewalk de-icing salt, freezing rain, and humidity.
4. Do you fabricate custom solid brass handrails and bronze balustrades for luxury NYC interiors? +
Yes. Our Custom Brazing Gallery (23 projects) showcases our hand-brazed bronze acanthus scrollwork, 24k gold-leaf medallions, crystal-mounted balusters, and continuous curved solid brass cap rails installed in Fifth Avenue, Park Avenue, Tribeca, and SoHo residences.
5. Where is your NYC ironwork shop located and how do I schedule a free on-site estimate? +
Our workshop and showroom are located at 98 Thames St, Brooklyn, NY 11237. Call Damian Arce directly at (646) 474-6712 or (347) 319-0967, or message us on WhatsApp at +1 (973) 849-5177 with photos or measurements for a free on-site consultation anywhere in NYC.
Transform Your New York Property with Custom Ironwork
Ready to start your custom railing, door, gate, balcony, canopy, or staircase project in NYC? Contact Master Artisan Damian Arce directly for a fast quote.